Canon Paper Deck-AF1 Service Manual page 145

Table of Contents

Advertisement

5
Installation > Air Heater Unit Installation Procedure > Installing the Air Heater Unit
MEMO:
When installing the air heater unit on the middle deck, connect the 5-pin connector
of the middle deck air heater harness to the CN7 of the AC distributor PCB. When
installing the air heater unit on the lower deck, connect the 4-pin connector of the lower
deck air heater harness to the CN6 of the AC distributor PCB.
14
14) Put the AC distributor PCB harness in the clamps, and then close the clamp.
5
Installation > Air Heater Unit Installation Procedure > Installing the Air Heater Unit
13
13) Install the AC distributor cover using two screws.
15
15) Connect 4-pin connector of the harness 1 to the CN1 of the air heater PCB. Connect the 8-pin
connector of the harness 2 to the CN2 of the air heater PCB.
F-5-134
x2
F-5-133
51
F-5-135
51

Advertisement

Table of Contents
loading

Table of Contents