Removing The Feed Motor - Canon DADF-N1 Service Manual

Chapter 3
2) Remove the 2 screws [2], and detach the
rear cover [3].
Be sure to detach the cover while
feeding the 3 claws [4] of the rear cover.
F-3-15
3.3.2.2 Removing the
Feed Motor
1) Free the 5 claws [1] of the harness guide;
then, disconnect the connector [2].
[2]
F-3-16
3-6
0007-1586
[1]
2) Remove the tension spring [3].
F-3-17
3) Remove the 2 screws [4] and the stepped
screw [5]; then, detach the feed motor
[6] together with the adjusting plate [7].
[5]
[4]
F-3-18
[3]
[7] [4]
[6]