Removing The Swing Motor (M102/M202/M302) - Canon Paper Deck-AF1 Service Manual

4
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Swing Motor (M102/M202/M302)

Removing the Swing Motor (M102/M202/M302)

3) Remove one screw and then remove the motor cover.
MEMO:
The removal procedure of
the swing motor from the
upper deck is described
below. The procedure
of the middle and lower
decks is the same.
1) Open the upper deck manually.
2) Remove papers in the deck and
then fully move the side guide
plate to the inside.
5) Remove the harness from the swing motor.
4 Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Swing Motor (M102/M202/M302)
x1
F-4-90
F-4-92
4) Remove two screws and then remove the swing motor.
x2
41
F-4-91
41