Software Installation - Equinox Systems ISPnano I Series User Manual

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of ISPNANO S3 KIT - ISP PORTABLE PROGRAMMER
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com

2.3.3 Software Installation

The ISPnano programmer comes with the software suite called 'EQTools' as standard. The latest
version of this software which was available at the time of shipping is supplied on CD-ROM with the
programmer. However, this software version is likely to have been superseded by a newer version.
Please check the Equinox website for the latest version of this software...
► Internet Web Site
The support / download page for the 'ISPnano programmer range' can be found at:
http://www.equinox-tech.com/products/details.asp?ID=1440&displ=tl
EQTools versions are quoted as e.g. EQTools V4 Build 2661
The filename for this version would be 'eqtools-V4-b2661.exe'
For further information, please locate the 'EQTools – Getting Started Guide' PDF document either
on the CD-ROM supplied with the programmer or from the Equinox Web Site.
Please refer to section 2 of the guide for detailed EQTools installation instructions.
28 ISPnano Series Programmer - User Manual – V1.11 – 12
th
May 2011