Equinox Systems ISPnano I Series User Manual page 14

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of ISPNANO S3 KIT - ISP PORTABLE PROGRAMMER
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
Upload Wizard - Standalone Project Upload Utility
This software utility is used to upload Programming Projects to any
Equinox programmer. These projects can then be used in
Standalone Mode, i.e. without a PC.
Please follow the on-screen instructions within the Upload Wizard
•
utility itself.
Application Note – AN117
Labview – Remote Application Control – Application Note
This upgrade allows a production facility to control a single
programmer from a 'Labview for Windows' application. The
Application note describes how to control the programmer using a
custom Labview (from National Instruments) application.
The following sources of documentation are available for this
software:
Application Note – AN109
•
Remote Application Control – Application Note
Describes how to control the programmer using a custom Remote
Application written in e.g. Visual Basic, C++, C Builder, Delphi etc.
The following sources of documentation are available for this
software:
Application Note – AN109
•
ConsoleEDS Pro – Application note
This software utility allows any Equinox programmer to be controlled
via simple Command Line instructions from a Command Window
within Windows.
The following sources of documentation are available for this
software:
Application Note - AN111
•
JTAG In-System (ISP) Upgrade – Application Note
This license upgrade enables the programmer to support high-speed
In-System Programming (ISP) of the Atmel ATmega microcontroller
family using the JTAG algorithm. Support is offered for both single
and multiple JTAG devices in a JTAG Chain.
The following sources of documentation are available for this
software:
Application Note – AN105
•