Programmer - Target I/O Signals - Equinox Systems ISPnano I Series User Manual

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of ISPNANO S3 KIT - ISP PORTABLE PROGRAMMER
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
1.6 Programmer – Target I/O Signals
The ISPnano features the following programmable signal lines which interface the programmer and
the Target IC(s) to be programmed on the Target System:
5 x Programmable Input / Output lines
•
1 x Programmable Output only line
•
1 x Dedicated I2C (Two Wire Interface) port
•
1 x Dedicated RESET pin
•
The diagram below shows the available programmer I/O lines:
Please note:
These I/O signals are available on the 16-way IDC Connector labelled "ISP PORT".
•
12 ISPnano Series Programmer - User Manual – V1.11 – 12
th
May 2011