Table of Contents
Advertisement
Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of ISPNANO S3 KIT - ISP PORTABLE PROGRAMMER
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
1.3 ISPnano MUX2 / MUX4 / MUX8 - Multiplexed Programmers
The 'ISPnano-MUX' family of ISP programming systems have been specially developed for medium
to high-volume production programming applications where there is a requirement to program multiple
devices mounted on a 'PCB Panel'. The 'ISPnano-MUX' programmers use a single integrated
'ISPnano Series 3' programmer which is then multiplexed sequentially to each UUT (Unit Under
Test) in turn on the PCB panel. This allows the system to sequentially program up to 8 individual
UUTs, one after the other.
Main Features...
Available as 2 / 4 or 8 channel multiplexed programming system
•
Supports sequential programming of 2 / 4 or 8 UUTs (depending on programmer model)
•
A single 'ISPnano Series 3' programmer is multiplexed sequentially to 2 /4 / 8 individual
•
Target Boards (UUTs)
All programming signals are multiplexed to each UUT using high-quality analogue switches
•
All programming signals are fully ESD and over-voltage protected
•
All passive / power signals (Target VCC, Target Vpp and EXT-VCC power signals) are
•
switched via individual high-quality relays to each UUT
Power is always switched off to the target UUT before switching to the next UUT thus
•
providing very long relay contact life
Each programming channel features its own interchangeable 'I/O Connector Module' with
•
relays and any custom target connectors
Status indicators include - current channel being programmed and PASS / BUSY / FAIL
•
Controllable via a PC using the Equinox EDS, ConsoleEDS or ISP-PRO software utilities
•
Channel multiplexer control can be controlled either via the PC or a remote system
•
ISPnano-MUX Programmer range....
There are currently three programmers in the 'ISPnano-MUX' family as detailed in the table below....
Programmer version:
Number of multiplexed
programming channels
No. of programming
channels
(RS485 networked)
Intended use /
application
Availability
ISPnano-MUX2
ISPnano-MUX4
2
up to 64 channels
Programming 2
Programming
devices on the
4 x PCBs on a
same PCB e.g.
multi-PCB panel
microcontroller +
memory device
Q2 2011
ISPnano-MUX8
4
up to 128
up to 256
channels
channels
Programming
8 x PCBs on a
multi-PCB panel
Q2 2011
Available now
8
Advertisement
Table of Contents
