Getting Started Guide; Overview - Equinox Systems ISPnano I Series User Manual

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of ISPNANO S3 KIT - ISP PORTABLE PROGRAMMER
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com

2.0 Getting Started Guide

2.1 Overview

This section gives a 'Quick Start' Guide to using the programmer. Please refer to the table below for
help installing the programmer hardware and software and also for the operating instructions for the
programmer.
Description
Hardware Installation Procedure
Software Installation Overview
Programmer Operating Modes
Development Mode (EDS)
Standalone - Keypad Mode
Standalone – ASCII Text Communications Control
Standalone – 4-Wire TTL Control
Target System connect / Disconnect Detection
Script Mode
ConsoleEDS
Further help and instructions can be found in the following documents:
1. 'EQTools – Getting Started Guide' (pdf manual) supplied on CD-ROM which came with the
programmer (also available on-line)
2. 'EQTools – On-line Help File' (Press <F1> within EQTools).
Refer to
section
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.10
2.11