Power Jumper Contacts/Field Supply; Cage Clamp; Figure 3: Cage Clamp ® Connectors; Table 5: Legend For Figure „Cage Clamp ® Connectors - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-461 2AI Pt100/RTD
3.2.2

Power Jumper Contacts/Field Supply

The I/O module 750-461 has no power jumper contacts.
3.2.3

CAGE CLAMP

Figure 3: CAGE CLAMP
Table 5: Legend for Figure „CAGE CLAMP
Channel
1
2
Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
Manual
Version 1.4.0
®
Connectors
®
Connectors
®
Designation Connector
+R1
RL1
−R1
Shield
+R2
RL2
−R2
Shield
Device Description
Connectors"
Function
1 Sensor 1: +R
2 Sensor 1: RL
3 Sensor 1: −R
4 Shield (screen)
5 Sensor 2: +R
6 Sensor 2: RL
7 Sensor 2: −R
8 Shield (screen)
17