Connection Examples; Rtd, 2-Conductors; Rtd, 3-Conductors; Figure 10: Example Connection 2 × Rtd, 2-Wire - WAGO -I/O-SYSTEM 750 Manual
2ai pt100/rtd 2-channel analog input module for resistance sensors
Hide thumbs
Also See for WAGO-I/O-SYSTEM 750:
- Manual (450 pages) ,
- User's installation and configuration (335 pages) ,
- Technical description, installation and configuration (236 pages)
Table of Contents
Advertisement
40
Connect Devices
6.2
Connection Examples
Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
6.2.1
2 × RTD, 2-Conductors
Figure 10: Example Connection 2 × RTD, 2-wire
6.2.2
2 × RTD, 3-Conductors
Figure 11: Example Connection 2 × RTD, 3-wire
WAGO-I/O-SYSTEM 750
750-461 2AI Pt100/RTD
Manual
Version 1.4.0
Advertisement
Chapters
Table of Contents
