Technical Condition Of Specified Devices - WAGO -I/O-SYSTEM 750 Manual
2ai pt100/rtd 2-channel analog input module for resistance sensors
Hide thumbs
Also See for WAGO-I/O-SYSTEM 750:
- Manual (450 pages) ,
- User's installation and configuration (335 pages) ,
- Technical description, installation and configuration (236 pages)
Table of Contents
Advertisement
WAGO-I/O-SYSTEM 750
750-461 2AI Pt100/RTD
Appropriate housing (per 2014/34/EU) is required when operating the WAGO-
I/O-SYSTEM 750 in hazardous environments. Please note that a prototype test
certificate must be obtained that confirms the correct installation of the system in
a housing or switch cabinet.
2.1.4
Technical Condition of Specified Devices
The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. WAGO
Kontakttechnik GmbH & Co. KG will be exempted from any liability in case of
changes in hardware or software as well as to non-compliant usage of devices.
Please send your request for modified and new hardware or software
configurations directly to WAGO Kontakttechnik GmbH & Co. KG.
Manual
Version 1.4.0
Important Notes
11
Advertisement
Chapters
Table of Contents
