Configuration And Calibration - Raven SBGuidance Onland Plough Installation Manual

SBGuidance Onland Plough I Version 1.3 I CAN

4. Configuration and calibration

The following software and firmware versions
are required for the setup, calibration and use
of the Onland Plough steering:
 CAN-Tool 1.29 or more recent version.
 Onland Plough-steering firmware
STU_Onland_Plough_3.0.25 or newer
 SBGuidance 4.0.x or newer.
Check the download page on
www.sbg.nl for the most recent software
and firmware versions.
View Configuration manual – CANbus
controllers for updating a steering
controller.
Figure 26 CANTool MyDevice Implement Controller
SBG-Onland-Plough-IM-EN-V1.3 I Pag 27/39