Table of Contents
Advertisement
3. Mounting antenna tilt-
mechanism
When a mounted reversible plough is used for
Onland Plough steering the antenna tilt
mechanism needs to be installed. The
mechanism makes sure that the GPS antenna
always is in the upwards position regardless of
the position of the plough. After installing the
basic components, as described in chapter 2,
the following components need to be installed:
1. Mounting of the tilt mechanism.
2. Mounting of the 6/2 hydraulic valve.
3. Mounting of the hydraulic hoses.
4. Connecting cabling.
The mounting of the cabling is already
described in chapters 0 and 2.8.
3.1. Mounting of the tilt mechanism
The tilt mechanism consists of a universal
frame combined with a brand/type specific
adapter piece. At this moment the specific
adapter pieces are available for Lemken and
Kverneland ploughs. See chapter 1.2 for an
overview of the available adapter pieces. The
mounting of the universal frame is shown in
Figure 20.
Make use of the bolts, washers and nuts that
are included in the installation kit.
Pag 24/39 I SBG-Onland-Plough-IM-EN-V1.3
SBGuidance Onland Plough I Version 1.3 I CAN
Figure 20 schematic view of the universal frame
CAN
Advertisement
Table of Contents
