PS200
PORTABLE GAS MONITOR
Figure 42: Apply Gas Screen (4-Gas Model)
6.2.1 Pumped Instruments - Regulator Selection
If the monitor has a pump enabled, the user is asked if the pump will be used during the bump test,
as illustrated in
Figure 43: Regulator Valve
• YES – use a demand or balanced flow regulator, press the R button.
• NO – use a direct flow regulator, press the L button.
6.3. Applying Test Gas
Apply the test gas to the monitor via the direct flow regulator set to 0.5 l/min, as shown in
44: Bump Test
Kit.
28
Choice.
Figure 43: Regulator Valve Choice
Figure 44: Bump Test Kit
Figure
64171
Revision 12.1