PS200
PORTABLE GAS MONITOR
Figure 50: Connect Cable to Charging/Comms Clip
3. Connect the other end of the charging cable to the USB Power adapter (or suitable USB socket).
Figure 51: Connecting the Cable to the USB Power Adapter
4. During charging, the battery symbol
5. When charging is complete, the full battery symbol
Note: Leaving the monitor connected to the charger will not damage it.
6. Disconnect from the power source.
7. Grip the charging/comms clip and firmly pull it away from the monitor.
32
and 'CHARGING' flash in the display.
and 'CHARGED' are displayed.
64171
Revision 12.1