Calibration; General Description - Teledyne GMI PS200 User Manual

9. Calibration

WARNING: ONLY AUTHORIZED PERSONNEL MAY CALIBRATE THE
MONITOR.

9.1. General Description

The monitor has been calibrated for particular gases. Where any doubt exists, return the monitor
to an authorized distributor for calibration.
Various calibration options are available:
1. Quick Calibration (if enabled)
2. Field Calibration (if enabled)
3. Manual Calibration using flexiCal Plus software
4. Automatic Calibration – the GMI Automatic Bump/Calibration Station (shown in
PS200 Auto/Bump Calibration
to bump test and calibrate the monitor in a controlled manner whilst maintaining a record of
calibration results. For further details contact GMI or an authorized distributor.
Figure 54: PS200 Auto/Bump Calibration Station
Note: For further information on options 2, 3, and 4, please contact GMI or an
authorized distributor.
64171
Revision 12.1
Station) provides controlled delivery of gases permitting users
PS200
PORTABLE GAS MONITOR
Figure 54:
35