Features; Datalogging; Accessing Logged Data; Filters - Teledyne GMI PS200 User Manual

PS200
PORTABLE GAS MONITOR

2.2. Features

• Compact, lightweight and robust.
• Measurement and display of up to 4 gases.
• Simple 2 button operation.
• Audible, visual (hi-viz) flashing LED's and vibrating alarms.
• Audible and visual confidence signal (configurable), confirming monitor operation to the
user.
• Green display during normal operation and red during alarm condition.
• Internal pump (optional).
• Manual and automatic data logging.
• Internal Li-Ion (Lithium Ion) rechargeable battery.
• Maximum recharge time of 4 hours.
• Robust clip to allow fitting to belt, pocket, etc.
• Communications interface to allow downloading of stored data.
• Fully certified to international standards.
• Comprehensive range of accessories.
• Quick Configuration Display allows the configuration to be viewed without fully switching
the monitor ON.
Typical operating parameters are detailed in
of this manual.

2.3. Datalogging

Datalogging allows gas measurements, event logs, bump tests, and calibration details to be
stored for downloading to a PC / Laptop via a USB connection. Typically, the monitor can store
up to 6 months of data (refer to

2.3.1. Accessing Logged Data

Download data from the monitor to a PC/Laptop using the standard charging / comms cable
and additional software. Contact Technical Support (refer to
further details.

2.4. Filters

Filters protect the monitor from water and dust ingress. Check filters regularly and replace as
necessary (refer to Section 8.2. Replacing the
8
Appendix A. Operating Parameters & Sensor Types
Appendix A. Operating Parameters & Sensor
Filters).
Types).
Appendix B. Technical Support) for
Revision 12.1
64171