Quick/Full Bump Test; Quick Bump Test; Full Bump Test; Confirm Alarms - Teledyne GMI PS200 User Manual

6.4. Quick/Full Bump Test

Operation now depends on whether QUICK or FULL bump is configured.

6.4.1 Quick Bump Test

As the alarm threshold for each range is exceeded, the audible/visual/vibration alarms will
activate and a symbol will appear, otherwise a

6.4.2 Full Bump Test

After a short period of time, the gas readings are checked against configurable limits. The
audible/ visual/vibration alarms will activate and a
within these limits, otherwise a

6.5. Confirm Alarms

The user is prompted to confirm if the audible and visual alarms were activated, as shown in
45: Confirm Alarms
6.5.1 Bump Test – Pass
After selecting YES, BUMP TEST PASS is displayed, as shown in
bump test result including date and time is automatically datalogged.
When the gas readings fall below their alarm set-points, or after 60 seconds, the bump test is
complete, and the monitor will automatically return to normal operation.
64171
Revision 12.1
symbol will be displayed.
symbol will be displayed.
Figure 45: Confirm Alarms
Figure 46: Bump Test Pass
PORTABLE GAS MONITOR
symbol will appear if the readings are
Figure 46: Bump Test
PS200
Figure
Pass. The
29