Setting Cpu Name - Mitsubishi Electric MR-MQ100 User Manual

12 COMMUNICATION

12.1.3 Setting CPU name

(1) HUB connection setting
When setting up a connection to a hub, a label and comments can be added to
each controller in the CPU Name Setting tab of the Basic Settings window.
(Communication is still available even without defining a Label and/or Comment.)
"CPU Name Setting"
(System Setting > Basic Setting > CPU Name Setting)
Item
Enter a label (name and/or
Label
purpose) of the Motion controller.
Enter comments regarding the
Comment
Motion controller.
The "Find CPU (Built-in Ethernet port) on Network" function in the "CPU side
I/F Detailed Setting of PLC Module" conveniently shows the below information
when MT Developer2 and the Motion controller are connected via the
PERIPHERAL I/F (Ethernet).
• IP address .
• CPU type.
• Label.
• Comment.
Contents
Up to 10 characters.
Up to 64 characters.
12 - 9
Length