Mitsubishi Electric MR-MQ100 User Manual page 218

12 COMMUNICATION
(2) Hub connection setting
(a) IP Address
The IP address of the Motion controller has to be considered when the IP
address of the computer is already set. The below setting is one example.
(For instance, the IP address of the computer is [192.168.1.1])
The IP address of the computer
"Built-in Ethernet Port Setting"
12 - 7
For instance
[192.168.1.1] is already set as
the IP address of the computer.
Set the values of these 3
columns to the same value as
the computer's setting.
Be sure this column has a
different value than the
computer's setting.
For example, [192.168.1.2] on
the controller when [192.168.1.1]
is set on the computer side.
Set this value to be the same as
the "Built-in Ethernet Port
Setting.
In this example, [192.168.1.2]