Mitsubishi Electric MR-MQ100 User Manual page 51

2 SYSTEM CONFIGURATION
•
System structure (Allocation of axis No.)
(3) Setting of the axis No. and axis select rotary switch of servo
amplifier
Axis No. is used in the program to set the axis numbers of any servo amplifiers
connected to the motion controller via SSCNET .
Set the axis select rotary switch of the servo amplifier to "0", because the axis
number is fixed in the "system structure" display as "d01".
(The default setting of the axis select rotary switch of servo amplifier is "0".)
2 - 28
•
Axis select rotary switch
(Servo amplifier)
8
Set the servo amplifier's
rotary switch to "0".
The axis number "d01"
is fixed on the "system
structure" display.