Special Registers - Mitsubishi Electric MR-MQ100 User Manual

7 POSITIONING DEDICATED SIGNALS

7.5.2 Special registers

Special registers are internal registers whose applications are fixed in the
Motion controller. For this reason, it is not possible to use these registers in
Motion SFC programs in the same way that normal registers are used.
However, data can be written as needed in order to control the Motion
controller.
Data stored in the special registers are stored as BIN values if no special
designation has been made to the contrary.
Explanation of headings used in the table on the next page.
Item
Number • Indicates the No. of the special register.
Name • Indicates the name of the special register.
Meaning • Indicates the nature of the special register.
Details • Indicates detailed information about the nature of the special register.
• Indicates whether the register is set by the system or user, and, if set by system, when
setting is performed.
<Set by>
S: Set by system (Motion controller)
U: Set by user (Motion SFC program or test operation using MT Developer2)
S/U: Set by both system (Motion controller) and user
Set by <When set>
(When set) Main process: Set during each main processing (free time processing of the CPU)
Initial process: Set only during initial processing (when power supply is turned ON, or
Status change : Set only when there is a change in status
Error : Set when error is occurred.
Request : Set only when there is a user request (Special relay, etc.)
Operation cycle : Set during each operation cycle of the Motion controller.
Explanation
Indicated only if setting is done by system (Motion controller).
when executed the reset)
7 - 29