Danfoss VLT AHF 005 Design Manual page 10

Introduction
1 1
CAUTION
Non-authorized removal of required cover, inappropriate
use, incorrect installation, or operation create the risk of
severe injury to persons or damage to material assets.
•
To avoid the risk, only let authorized and
qualified personnel handle the VLT
Harmonic Filter AHF005/AHF 010.
NOTICE
The filters shown in this design guide are specially
designed and tested for operation with Danfoss
frequency converters, see chapter 1.2.1 Intended Use.
Danfoss takes no responsibility for the use of the filters
with third-party frequency converters.
NOTICE
REPAIR OF FILTER
Only Danfoss authorized, qualified personnel are allowed
to repair the VLT
AHF010. See chapter 8 Spare Parts for more details.
NOTICE
Commissioning is only allowed when there is compliance
with the EMC Directive 2014/30/EU.
The filters meet the requirements of the Low Voltage
Directive 2014/35/EU.
NOTICE
Protect the filter from inappropriate loads, particularly
during transport and handling. Components are not
allowed to be bent. Do not alter the distance in between
isolation. Avoid touching electronic components and
contacts.
8
VLT
®
®
Advanced Harmonic Filter AHF005/
Danfoss A/S © 10/2016 All rights reserved.
®
Advanced Harmonic Filter AHF 005/AHF 010
Advanced
MG80C502