Environmental Data - Danfoss VLT AHF 005 Design Manual

Specifications
AHF version
500–690 V
50 Hz
AHF AHF
005 010
[A] [A]
15 15
20 20
24 24
29 29
36 36
50 50
58 58
7 7
77 77
87 87
109 109
128 128
155
155
197
197
240
296
240
366
296
395
Table 7.6 Terminal Specifications, 500–690 V, 50 Hz

7.1.3 Environmental Data

Ambient temperature during operation
Temperature during storage and transpor-
tation
Maximum altitude above sea level
Relative humidity
Insulation strength
Resonance strength
Sine vibration test
Packaging
Enclosure protection rating
Approvals
Table 7.7 Environmental Data
1) UL only for 460 V/60 Hz and 600 V/60 Hz versions.
58
VLT
AHF
Terminals X1 and X2
enclosure
size
Cable
cross-
sections
Termina-
2 tion
[mm
Type
(AWG/
MCM)]
Cable
1.5–25
X3 end
(16–4)
sleeve
1.5–50 Cable
X4 (16– end
1-1/0) sleeve
Cable
10–70
X5 end
(8–2/0)
sleeve
2.5–95 Cable lug
X6
(14–3/0) M8
25–300 Cable lug
X7
(4–600) M16
25–300 Cable lug
X8
(4–600) M16
5–45 °C (41–113 °F) without derating
5–60 °C (41–140 °F) with derating 1.5% per °C. See Illustration 7.1
Transport: -25 °C to +65 °C (-13 °F to +149 °F)
Storage: -25 °C to +55 °C (-13 °F to 131 °F)
1000 m (3280 ft) without derating
1000–4000 m (3280–13123 ft) with derating 5% per 1000 m (3280 ft)
Humidity class F without condensation 5–85% - Class 3K3 (non-condensing) during operation
Overvoltage category lll according to EN 61800-5-1
Base standard: DIN EN 600068-2-6
Test specification: 5 Hz, 150 Hz, 3 directions (0.5 g, 0.1 g, 0.5 g)
Base standard: DIN EN 600068-2-6
Test specification: 5–13.2 Hz, 150 Hz (2 mm (0.08 in) peak to peak 0.7 g)
DIN 55468 for transport packaging materials
IP00 and IP20
Optional IP21/NEMA1 upgrade kits for IP20 versions
CE
The Low Voltage Directive
UL 1)
Danfoss A/S © 10/2016 All rights reserved.
®
Advanced Harmonic Filter AHF 005/AHF 010
AHF terminal connections
Terminals X3 and X4
Cable
cross-
Torque Torque
sections
Termina-
[Nm (in- [Nm (in-
2 tion
[mm
lb)]
(AWG(M
CM)]
Cable
3.5 (31) 1.5–16 2.4 (21.2)
end
±10%
(16–6)
sleeve
Cable
4 (35.4) 1.5–25 3.5 (31)
end
±10%
(16–4)
sleeve
Cable
5 (44.3) 3.5 (31)
1.5–25
end
±10%
(16–4)
sleeve
1.5–50 Cable
10 (88.5) 4 (35.4)
(16– end
±10%
1-1/0) sleeve
50 Cable
16–150
(442.5) end
(6–300)
±10%
sleeve
50 Cable
16–150
(442.5) end
(6–300)
±10%
sleeve
Terminals A and B
Cable
cross-
Torque
sections
Termina-
[Nm (in-
2 tion
[mm
lb)] lb)]
(AWG/
MCM)]
Cable
0.5–4 0.8 (7.1)
end
±10% ±10%
(20–12)
sleeve
Cable
0.5–4 0.8 (7.1)
end
±10% ±10%
(20–12)
sleeve
Cable
0.8 (7.1)
0.5–4
end
±10% ±10%
(20–12)
sleeve
Cable
0.5–4 0.8 (7.1)
end
±10% ±10%
(20–12)
sleeve
18 Cable
0.5–4 0.8 (7.1)
(159.3) end
±10%
(20–12)
±10%
sleeve
18 Cable
0.5–4 0.8 (7.1)
(159.3) end
±10%
(20–12)
±10%
sleeve
PE
Torque
Type [Nm (in-
lb)]
10 (88.5)
M8
±10%
10 (88.5)
M8
±10%
10 (88.5)
M8
±10%
10 (88.5)
M8
±10%
40 (354)
M12
±10%
40 (354)
M12
±10%
MG80C502