Download Print this page

Setup And Configuration - Vitek VT-TR2NHA Series Quick Start Manual

4, 8, or 16 channel 5-in-1 hd-tvi / ahd / cvi / cvbs / ip ndaa compliant digital video recorders

Advertisement

SETUP & CONFIGURATION:
1. Notes
● Please read this instruction carefully for correct use of the product and preserve it for reference purposes.
● This manual is suitable for 4/8/16 CH HD Hybrid DVR. All the examples and pictures used here are for reference
only.
● There may be technically incorrect places or printing errors in this manual. The updates will be added into the
future versions of this manual. The contents of this manual are subject to change without notice.
● To prevent electric shock and risk of fire hazards, do NOT use other than specified power source.
2. Check Package Contents
Please confirm that the device and all accessories are included in the package. If there is any damage, shortages
or defects, please contact your distributor immediately.
1) Transcendent Series DVR
2) IR Remote Control
3) Quick Start Guide
4) Power Supply
3. Rear Panel Connections
VT-TR2NHA410 Rear Panel Connections
VT-TR2NHA810 Rear Panel Connections
VT-TR2NHA1620 Rear Panel Connections
4. Startup & Shutdown
● Startup:
1 Connect a monitor and the power.
2 The device will boot up and the power indicator will display blue.
3 A wizard window will pop up.
● Shutdown:
Go to "Main Menu" and then select "Shutdown" icon. This will bring up a shutdown window. The device will shut down
by clicking "OK" button. Then disconnect the power.
5. Login
You must configure the wizard when you start the DVR for the
first time. You can skip the settings of wizard next time. The
default username is "admin" and the password is set by you
when you configure the wizard for the first time. Click "Start"
and select "Login". This will take you to a login box. The
default username is "admin"; the default password is
"123456". Enter username and password and click "Login"
button to go to the main menu setup.
6. Analog Camera Connection
First connect the cameras to the DVR. Then go to Start →
Settings → Camera → Manage Camera → Signal Access Set
to checkmark the video mode. The actual signals input shall
correspond to the video mode. Please refer to User Manual
for details.
5) HDD Screws
6) SATA Cables
7) USB Mouse
Username
admin
Enter Password
Password
Display Password
Edit Security Question
Login
Log In Automatically
Login
Cancel

Advertisement

loading

This manual is also suitable for:

Transcendent seriesVt-tr2nha410Vt-tr2nha810Vt-tr2nha1620