Advertisement
SETUP & CONFIGURATION:
1. Notes
reference only.
future versions of this manual. The contents of this manual are subject to change without notice.
2. Check Package Contents
Please confirm that the device and all accessories are included in the package. If there is any damage, shortages
or defects, please contact your distributor immediately.
1) Transcendent Series DVR
2) IR Remote Control
3) Quick Start Guide
4) Power Supply
3. Rear Panel Connections
4. Startup & Shutdown
1 Connect a monitor and the power.
2 The device will boot up and the power indicator will display blue.
3 A wizard window will pop up.
Go to "Main Menu" and then select "Shutdown" icon. This will bring up a shutdown window. The device will shut down
by clicking "OK" button. Then disconnect the power.
5. Login
You must configure the wizard when you start the DVR for the
first time. You can skip the settings of wizard next time. The
default username is "admin" and the password is set by you
when you configure the wizard for the first time. Click "Start"
and select "Login". This will take you to a login box. The
default username is "admin", and the default password is
"123456". Enter username and password and click "Login"
button to go to the main menu setup.
6. Analog Camera Connection
to checkmark the video mode. The actual signals input shall
correspond to the video mode. Please refer to User Manual
for details.
5) USB Mouse
6) Rack Ears
7) DB25 Audio Connector [see below]
16 Ch. Multi Pin Whip-Style
Audio Breakout Connector DB25
to RCA (x16) -- Connector is an
included accessory.
Username
admin
Enter Password
Password
Display Password
Edit Security Question
Login
Log In Automatically
Login
Cancel
Advertisement
