Alarm-Out; Motion Zone Setup - Vitek VT-H Series User Manual

4, 8, and 16 channel digital video recorder with h.264 compression

Hide thumbs Also See for VT-H Series:

Table of Contents

2-5-1. ALARM-OUT

Item

ALARM OUT

SENSOR IN

MOTION ON

VIDEO LOSS ON

ALARM DURATION

ERROR ALARM

Select MOTION ZONE and then select either PARTIAL ZONE or FULL ZONE using the control button (

▶ ▼

). After that, press the SEL button.

If FULL ZONE is selected, the motion setting screen is not displayed. Only set the level of sensitivity for

MOTION SENSITIVITY.

FULL ZONE: The motion sensor is active on the whole screen.

PARTIAL ZONE: The motion sensor is active in the set detection frame.

Select the sensor detection position using the control button (

Then the selected position‟s color will be changed. Press ESC button to return to the DEVICE setup menu.

Figure 2.5.2. ALARM-OUT setup screen

Table 2.5.2. Menu item in ALARM-OUT Setup screen

Select an alarm out number.

Available NO: 4CH(1), 9CH(1), 16CH(1)

Enable setting up to 4 cameras of 4/9/16 cameras for each alarm.

Set the alarm dwell time from 5 to 60 seconds.

Set the error type for the alarm activation. The options are

OFF, ALL, HDD ERROR and VIDEO LOSS.

Description

◀ ▲ ▶ ▼

) and press the SEL button.

VT-H Series

◀ ▲

Table of Contents