Wheel Tread Setting; Greasing The Tractor - Zetor COMPAX CL Series Operator's Manual

MAINTENANCE

Wheel Tread Setting

The front wheel track can be set in two positions. The rear wheel track can be set in four positions as shown
in the figure.
CCL3540049
After adjusting the wheel tread, the width and turning radius of the vehicle change.

Greasing the Tractor

Grease the tractor according to the service schedule.
Ensure that grease nipples are cleaned well before any attempt is made to grease them.
Lubrication of the Brake Levers
Remove the rubber caps on the floor and at the steering column to gain access to the lubrication points. Top
up the grease with the supplied grease pump.
79