Lower Hitch Disassembly; Multi-Level Hitch; Height Adjustment And Disassembly Of The Multi-Level Hitch Attachment Tail Piece - Zetor COMPAX CL Series Operator's Manual

Lower Hitch Disassembly

After releasing the locking devices, remove the two pins
(1).
Remove the lower hitch by pulling it backwards in the
direction of the arrow.
Follow the reverse procedure to reassemble the lower
hitch.

Multi-level hitch

Used to attach two-axle or lighter one-axle trailers. The guide tail piece is height adjustable. When working
with various agricultural machines, it is necessary to adjust the height of the hitch or dismount it if necessary.
ATTENTION: To connect the attached equipment, the automatic tail piece (if equipped) is
unlocked by the control lever of the hitch tail piece by lifting it to the upper position where it will
automatically lock in the open position. When the drawbar is situated in the correct position in
relation to the hitch, the machine is automatically locked, the machines are connected. Never place
your hands or foreign objects in the tail piece with the control lever locked in the upper position.
There is a risk of serious injury.
1. Multi-Level Hitch Console
2. Rear PTO Cover
3. Multi-level Hitch Attachment Tail Piece
4. Lower Swinging Hitch

Height Adjustment and Disassembly of the Multi-level Hitch Attachment Tail Piece

Remove the rear PTO cover and, if necessary, the lower
hitch before handling the multi-level hitch attachment tail
piece. Grasp the multi-level hitch attachment tail piece
firmly. Moving the lever (1) in the direction of the arrow
(upwards) engages the locking pins (2) and the tail piece
is freely movable in the grooves of the multi-level console.
Adjust the multi-level hitch attachment tail piece to
a suitable height so that the locking pins (2) are aligned
with the holes in the multi-level hitch console and release
the lever (1); the locking pins (2) slide into the holes in the
multi-level hitch console. Check that the pins (2) slightly
overlap the outer edge of the multi-level console. Perform
the disassembly of the multi-level hitch attachment tail
piece after pulling the lever (1), by sliding the tail piece
upwards out of the grooves of the multi-level console.
Perform the assembly in the reverse order.
Caution
Maximum horizontal load (D) - 42.8 KN

Maximum permitted vertical load - 1,200 kg

TRACTOR CONTROLS
UCL18NN009
UCL18NN006
UCL18NN008
63