Maintenance; Hood Opening; Tractor Lifting - Zetor COMPAX CL Series Operator's Manual

Hood Opening

Unlock the hood by pulling the locking hook down. Pay
attention to the wiring harness of the hood lights.
After unlocking the hood, lift it with your hands. The hood
is held in the raised position by means of a strut.

Tractor Lifting

If the tractor needs to be lifted for service, take it to
a suitably equipped workshop.
Before performing any work on the tractor, carry out the
following work. Engage front axle drive, first gear, parking
brake and install wedges under the wheels touching the
ground.
Before lifting the tractor, prevent it from swinging with
wooden wedges inserted on the front axle.
Use lifting equipment of suitable capacity, and place it in
the middle of the front and rear axles, paying attention to
the weight distribution.
There are no labels on the tractor regarding the position of
the lifting points, as it would be very difficult to place them
in accessible areas and they would be damaged by
operation.
Position the lifting equipment at the appropriate lifting points according to the type of
operation. Follow all of the above mentioned safety procedures.

MAINTENANCE

CCL3540035
CCL3540036
CCL3540037
CCL3540038
71