Gear Shift Lever; Reduced And Road Gears Shift Lever - Zetor COMPAX CL Series Operator's Manual

Gear Shift Lever

This lever must be used when using the clutch, both when
the tractor is stationary and when it is in motion.
It is located on the right side of the driver's seat.

Reduced and Road Gears Shift Lever

Reduced and Road Gears Shift Lever provides three
speed ranges. Use it when the tractor is at a complete
standstill, with the clutch pedal depressed in conjunction
with the gear shift lever to select the appropriate speed for
various operations.
Choose the correct speed range and gear for the relevant
task:
The machine can work with any gear with an

engine speed between 945 - 2,200 rpm. Within
these limits, the engine may be subjected to
various operations.
Never overload the engine running at low speed.

Increase the engine speed according to the

expected load. If the engine speed increases
slightly while the throttle lever is moved, the engine
is not overloaded.
Only move the range shift lever when the tractor has come to a complete stop and with the
clutch pedal depressed. Moving this lever while driving may damage the transmission.
Never use the range shift lever in the 'H' position when reversing. Failure to do so may result in
serious accidents or injuries.
52
TRACTOR CONTROLS
CCL3540019
CCL3540020
CCL3540021