Safety Labels - Zetor COMPAX CL Series Operator's Manual

1.Work Lights Rear
2. Rear Wiper
3. Fuel Tank
4. Position / Brake Light
5. Turn Signal Light
6. Lifting Link
7. Stabilizer Bar
8. Lower Link
9. Towing Hitch
10. PTO Shaft
11. Upper Link

Safety labels

IMPORTANT: This 'general safety information' should be stored with the machine as
reference data.
ATTENTION: This symbol means: ATTENTION! YOUR SAFETY IS AT RISK! The message that
follows this symbol contains important safety information. Follow the recommended precautions and
procedures for safe operation.
Keep safety labels clean and undamaged.

Do not wash the labels with a direct stream of high pressure water, as the label may peel

off.
If a safety label is damaged or lost, order a new one immediately and stick it to the

machine.
When replacing a labeled part with a new part, also replace the label.

GENERAL INFORMATIONS
CCLHTN013
35