Electric Lines Check; Fuses Check And Replacement; Fuse Panel - Zetor COMPAX CL Series Operator's Manual

MAINTENANCE

Electric Lines Check

Loose wire terminals can cause contact break and damaged wires can lead to poor electrical operation, short
circuits and fire. Replace or repair worn and damaged wires.
If the insulation of any conductor is damaged, wrap this conductor with insulating plastic tape or replace it.
If the conductor clips or straps are damaged, secure the wires with new clips or straps.
Have the lines checked regularly once a year by an authorized service center to prevent fire.

Fuses Check and Replacement

Fuses are installed in this tractor to prevent any possible
accident in the event of a malfunction of the line circuit.
CCL3540050
If an electrical system does not function correctly while driving, check for a blown fuse:
1. Remove the fuse box cover.
2. Remove the blown fuse.
3. Insert a new fuse of the same rating.
4. The function and rating of each fuse is indicated on the fuse box cover.
1 - Normal condition
2 - Blown
HODP141
Always eliminate the cause of the fuse blowing, otherwise a new fuse is likely to blow as well.
Always use a fuse of the specified rating, never replace a blown fuse with a higher fuse rating or
a wire.

Fuse Panel

82