PTO Shift Lever
To engage PTO, pull the shift lever to the 'ON' position.
To disengage PTO, pull the shift lever to the 'OFF'
position.
Only move the PTO shift lever with the PTO switched off.
Always use the clutch when connecting or disconnecting the PTO shaft.
Rear PTO
PTO speed (rpm)
PTO Shaft Cover
When not in use, lubricate the PTO shaft with grease and
install a cap.
Do not connect the PTO shaft while the engine is running and make sure all protective covers
are in place.
Under no circumstances should the rotational speeds specified by the implement
manufacturer be exceeded, as this may result in serious damage to the tractor/equipment and
serious injuries to bystanders.
Read the operating and maintenance manual of the implement carefully before operating it.
The measures must be taken to ensure that there are not bystanders around the tractor while
working with a PTO-driven implement. Rotating blades of the implement can cause serious injuries.
When not in use, install a protective cap on the PTO shaft.
TRACTOR CONTROLS
540
CCL3540024
CCL3540025
55