Combined Switch; Warning Lights Switch; Tachometer - Zetor COMPAX CL Series Operator's Manual

TRACTOR CONTROLS

Combined Switch

Turn Signal Light Switch Lever
Press the turn signal lever (1) down to signal a left turn.
Press the turn signal lever (1) up to signal a right turn.
Headlights Switch (if Beacon Light is Installed, also Beacon Light Switch)
High beam and low beam lights are controlled by the lever (2) on the main switch.
Position 3 - High beam lights (Beacon)
Position 4 - Low beam lights (Beacon)
Horn
Press the red button (5).
1 - Turn Signal Light Switch Lever
2 - Headlight Switch
3 - High Beam Lights (Beacon Light)
4 - Low Beam Lights (Beacon Light)
5 - Horn
U18N012

Warning Lights Switch

Push the hazard warning signal once to operate the
hazard warning light. (Left and right turn indicators flash).
Push the hazard warning light switch again to switch off
the hazard warning lights.
1 - Hazard warning signal S/W
UCL18N015

Tachometer

Displays the number of engine or PTO revolutions per
minute. At the highest gear also the speed.
HODP044
44