Throttle Lever (Manual Control); Brake Pedals - Zetor COMPAX CL Series Operator's Manual

Hide thumbs Also See for COMPAX CL Series:
Table of Contents

Advertisement

Throttle Lever (Manual Control)

It is used to set the engine speed.
Pushing (away from the operator): speed increase.
Pulling (towards the operator): speed decrease.
Never use the throttle lever unless you are working in the field. This can lead to increased
speed and an accident.

Brake Pedals

The brake is used to force the vehicle to stop. This vehicle is equipped with separate brakes for its left and
right side. The right and left brake pedals are designed to assist in turning the tractor in terrain and on
unpaved surfaces.
A connecting latch is used to connect the left and right brake pedals.
When the brake pedals are disconnected, the warning light is on. When the brake pedals are connected,
the warning light is off.
Driving on the road - Always connect both brake pedals,
the brakes are applied simultaneously, the one-side brake
indicator light is off.
Working in the field - Disconnect the brake pedals, only
one side of the tractor is braking, the one-side brake
indicator light is on.
A connecting latch is available to connect the left and right brake pedals when driving at
high speed or on the road.
For safety reasons, always use it on the road or when driving at high speed, as braking
on only one side can result in machine damage, serious accidents and serious injury or
death.
During tractor maintenance, make sure that the setting on both sides is the same.
50
TRACTOR CONTROLS
HODP055
CCL25045

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compax cl 35 ncCompax cl 40 nc

Table of Contents