Loader Mounting Points; Three-Point Hitch Position Control Lever - Zetor COMPAX CL Series Operator's Manual

TRACTOR CONTROLS

Loader Mounting Points

1. Screw size: M14x P2.0
Number of pcs: 4 (both sides)
Strength: 9T
2. Screw size: M12xP1.75
Number of pcs: 8 (both sides)
Strength: 9T
CCL3540061
See the loader manual for more information.

Three-point Hitch Position Control Lever

The implement can be lifted and lowered using the
position control lever.
Pull the lever back to lift the implement.
Push the lever forward to lower the implement.
When leaving the tractor, always lower the
implement to the ground, switch off the engine and
apply the parking brake to prevent injuries and
accidents.
CCL3540029
58