Sliding Seat - Zetor COMPAX CL Series Operator's Manual

ROPS (ROLL OVER PROTECTION STRUCTURES)

Sliding Seat

To adjust the seat position, move the adjustment lever and slide the seat towards or away from the
instrument panel and controls.
1 - Seat Belt
2 - Forward / Reverse Position Adjustment Lever
Before operating the tractor, it is important to adjust the seat to the most comfortable position and ensure
that it is properly locked in its position.
NOTE:
Do not use solvents to clean the seat. Use warm water with detergent.
Warning: Do not place your hand between the seat and the guide rail when adjusting the seat.
You may be injured.
Danger: Check that the seat is properly locked in its position before driving the tractor.
Danger: Always use the seat belt when the ROPS is installed/lifted. Do not use the seat belt if
the ROPS is folded down or not installed. Check the seat belt regularly and replace it if it is frayed or
damaged.
CCL25004
15