1. Manuals
  2. Brands
  3. HP Manuals
  4. Server
  5. HP-UX 11i v2
  6. Support manual

HP Smart Array -UX 11i v2 Support Manual page 74

Sas controllers for integrity servers
Hide thumbs Also See for Smart Array HP-UX 11i v2:
Table of Contents

Advertisement

Enlarged version
Connector Location............................... external
Connector........................................ 1E
Enclosure........................................ 1
Bay.............................................. 0
WWID............................................. 0x50001c1071540025
Device Type...................................... SES
Disk Capacity.................................... 0.0 GB
Device Status.................................... FAILED
Device Vendor ID................................. HP
Device Product ID................................ MSA70
Device Serial Number............................. SGA728007J
Device Firmware Version.......................... 1.42
Reserved Area (cfg/status info).................. 0.0 KB (0.0 MB)
Block Size (bytes/sector)........................ 0 bytes
M&P Data Stamped?................................ yes
Last Failure Reason.............................. NON DISK DEVICE
Physical Disk Flags:
Disk present and operational................... no
Non-disk device detected....................... yes
S.M.A.R.T. supported........................... no
S.M.A.R.T. errors (in factory M&P data)........ no
S.M.A.R.T. enabled............................. no
S.M.A.R.T. errors (in powerup M&P data)........ no
Attached to external connector................. yes
Configured in a logical drive.................. no
Configured as a spare disk..................... no
Disk write cache enabled at spin up............ no
Supports redundant controller operation........ no
Disk write cache enabled in current page....... no
Disk write cache disabled in default page...... no
---- SAS/SATA DEVICE 2E:1:0:0x5001438000328825 [SES] -------------------------
Connector Location............................... external
Connector........................................ 2E
Enclosure........................................ 1
Bay.............................................. 0
WWID............................................. 0x5001438000328825
Device Type...................................... SES
Disk Capacity.................................... 0.0 GB
Device Status.................................... FAILED
Device Vendor ID................................. HP
Device Product ID................................ MSA70
Device Serial Number............................. SGA72800DF
Device Firmware Version.......................... 1.50
Reserved Area (cfg/status info).................. 0.0 KB (0.0 MB)
Block Size (bytes/sector)........................ 0 bytes
M&P Data Stamped?................................ yes
Last Failure Reason.............................. NON DISK DEVICE
Physical Disk Flags:
Disk present and operational................... no
Non-disk device detected....................... yes
S.M.A.R.T. supported........................... no
S.M.A.R.T. errors (in factory M&P data)........ no
S.M.A.R.T. enabled............................. no
S.M.A.R.T. errors (in powerup M&P data)........ no
Attached to external connector................. yes
Configured in a logical drive.................. no
Configured as a spare disk..................... no
Disk write cache enabled at spin up............ no
Supports redundant controller operation........ no
Disk write cache enabled in current page....... no
74
Troubleshooting
Show Quick Links

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Smart Array HP-UX 11i v2 and is the answer not in the manual?

Questions and answers

Related Manuals for HP Smart Array HP-UX 11i v2

Related Products for HP Smart Array HP-UX 11i v2

This manual is also suitable for:

Smart array hp-ux 11i v3

Table of Contents