HP Smart Array -UX 11i v2 Support Manual page 42

Example 1 The saconfig help screen for HP-UX 1 1i v3
# saconfig
No device file specified
******************************************************************************
******************************************************************************
****
****
****
****
****
****
****
**** (C) Copyright 2003-2007 Hewlett-Packard Development Company, L.P.
******************************************************************************
Usage:
To display configuration
saconfig /dev/cissX
To display configuration with persistent device files
saconfig /dev/cissX -N
To create logical drive
saconfig /dev/cissX -R <RAID level> [-S <Stripe size (KB)>]
-p <physical_drive_id> [-p <physical_drive_id> ... ]
[-s <physical_drive_id>] [-c <capacity (GB)>]
RAID level can be 0, 1, 1+0, 5, or ADG.
For RAID 0, 1, and 1+0, stripe size can be 8, 16, 32, 64,
128, or 256 (default is 128).
For RAID 5 and ADG, stripe size can be 8, 16, 32, or 64
(default is 16).
"<physical_drive_id>" is:
OR
OR
To delete logical drive
saconfig /dev/cissX -D <Logical drive #>
To clear configuration
saconfig /dev/cissX -D all
To add spare drive to existing logical drive
saconfig /dev/cissX -A <Logical drive #> -s <physical_drive_id>
To delete a spare drive of a logical drive
saconfig /dev/cissX -D <Logical drive #> -s <physical_drive_id>
To delete all spare drives of a logical drive
saconfig /dev/cissX -D <Logical drive #> -s all
To change the expand priority of controller to low, medium, or high
42 Configuration
S A C O N F I G
for the HP SmartArray RAID Controller Family
version A.01.20
<channel_id>:<target_id> of the SCSI physical disk, e.g., 4:12
<connector>:<enclosure>:<bay> of the SAS/SATA physical disk,
e.g., 2I:1:10
<wwid> of the SAS/SATA physical disk, e.g., 0x500000e010f16432
U t i l i t y
****
****
****
****
****
****
****
****