HP Smart Array -UX 11i v2 Support Manual page 64

Sas controllers for integrity servers
Hide thumbs Also See for Smart Array HP-UX 11i v2:
Table of Contents

Advertisement

Example 6 Typical sautil <device_file> command output
# sautil /dev/ciss3
******************************************************************************
****
****
****
****
****
****
****
****
(C) Copyright 2003-2007 Hewlett-Packard Development Company, L.P.
******************************************************************************
---- DRIVER INFORMATION ------------------------------------------------------
Driver State........................ READY
---- CONTROLLER INFORMATION --------------------------------------------------
Controller Product Number........... P800
Controller Product Name............. HP PCIe SmartArray P800
Hardware Path....................... 0/6/0/0/0/0/1/0/0/0
Serial Number....................... P98690D9SU40R7
Device File......................... /dev/ciss3
Hardware Revision................... 'D'
Boot Block Revision................. 0.02
Firmware Revision (running)......... 4.10
Firmware Revision (in ROM).......... 4.10
Firmware Revision (inactive)........ 5.01
# of Logical Drives................. 10
# of Physical Disks Configured...... 54
# of Physical Disks Detected........ 58
Logical Drive Rebuild Priority...... 118 (high)
Array Capacity Expansion Priority... 64
Auto-Fail Missing Disks at Boot..... enabled
SCSI Transfer Detection Mode........ Auto Detect
---- ARRAY ACCELERATOR (CACHE) INFORMATION -----------------------------------
Array Accelerator Board Present?.... yes
Cache Configuration Status.......... cache enabled
Cache Ratio......................... 50% Read / 50% Write
Total Cache Size (MB)............... 456
Read Cache........................ 228
Write Cache....................... 228
Transfer Buffer................... 000
Battery Pack Count.................. 2
Battery Status (pack #1)............ ok
Battery Status (pack #2)............ ok
---- LOGICAL DRIVE SUMMARY ---------------------------------------------------
#
RAID
0
0
1
0
2
0
3
0
4
0
---- SAS/SATA DEVICE SUMMARY -------------------------------------------------
Location
internal
64
Troubleshooting
S A U T I L
S u p p o r t
for the HP SmartArray RAID Controller Family
version A.02.13
Size
751610 MB
10239 MB
10239 MB
3072 MB
209925 MB
Ct Enc Bay
WWID
3I
1
4
0x5000c5000148e709
U t i l i t y
(medium)
Status
OK
OK
OK
OK
OK
Type
DISK
****
****
****
****
****
****
****
****
Capacity Status
73.4 GB
OK

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Smart Array HP-UX 11i v2 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Smart array hp-ux 11i v3

Table of Contents