HP 9000 300 Series Hardware Configuration Manual page 40

3
4
The Auto System Selection menu changes to indicate
and
are all Y ("yes").
Auto System Selection
Keys Option Status
1 Scan for System Y
2 Selected System Y
3 Store Selected Sys. Y
E Execute
A Abort without changes
Type [key] RETURN ?
5
To execute the menu as it appears in the previous step, press
E,
followed by
{Return
J.
The system will give you the opportunity to identify the "Selected
System" in the next step.
If you decide
not
to change the Auto System Selection configuration, press
A
to
leave the configuration unchanged.
6
If you pressed
E,
your power-up display would change, and the available
operating systems would be listed in the upper right-hand corner like this:
Copyright 1991
Hewlett-Packard Company
All Rights Reserved
BOOTROM Rev. 3.01 2 MAY 91
MC68040 Processor
Configuration EEPROM
HP-HIL.Keyboard
:(device, select code/address, unit)
lH SYSTE'CHPUX
(other systems)
3·10 Configuring Internal Interfaces and Boot Modes