Download Table of Contents Print this page

HP 9000 300 Series Hardware Configuration Manual page 153

Hide thumbs Also See for 9000 300 Series:


Table of Contents
Verification Test
Plug in your controller's power cord and video cable, then turn on your
monitor and controller.
2. When the keyboard line appears, press
(space bar)
a few times to go into
attended mode.
3. Check the interfaces listed on the left-hand side of the screen:
• If the message,
is listed, you have correctly installed the
Interface .
• If the message above does not appear, check the installation procedure
and configuration settings, making sure there are no select code conflicts
and that the card is firmly seated in an even-numbered slot. If the
message still does not appear, call your HP Service Representative for
Filling Out the Worksheets
The following "Worksheet Entries" contain information needed to use the SCSI
Interface with various language/operating systems. Refer to the table for the
system you'll be using.
Copy this information to a worksheet or simply remember to refer here when
you need it.
If you changed the select code, write in your new select code instead of
When finished, you'll be ready to install your next peripheral or interface.
10-44 Configuring Popular Accessory Cards


Table of Contents

Related Manuals for HP 9000 300 Series

This manual is also suitable for:


Table of Contents