Controllers - HP 9000 300 Series Hardware Configuration Manual

Hide thumbs

Advertisement

Table of Contents
7
If you do not have an expander
attached, skip now to step 15.
If you have an expander:
a. Position the expander that
was attached to your
controller squarely over the
controller.
b. Align its backplane bottom
connectors with the
controller / expander
backplane connectors.
c. Lower the expander into
place mating the backplane
connectors.
8
Replace the expander's top
cover.
5
Memory Configurations
5-7

Advertisement

Table of Contents
loading

  Related Manuals for HP 9000 300 Series

This manual is also suitable for:

362382

Table of Contents