HP 9000 300 Series Hardware Configuration Manual page 113

10
HP 98622A GPIO Interface Card
Operating System Support
Operating/language system support is as follows:
• BASIC:
supported on revision 4.0 or later with Series 300 controllers.
• Pascal System: supported on revision 3.1 or later with Series 300 controllers.
• HP- UX Operating System: supported on revision 5.0 or later with Series 300
controllers.
Setting the Configuration Switches and Jumpers
The GPIO Interface may be configured in any number of ways depending on
the requirements of your application. Abbreviated instructions are provided
here; refer to the installation manual that came with the interface if you need
more information.
Refer to Figure 10-1 for switch and jumper positions.
10-4 Configuring Popular Accessory Cards