Download Table of Contents Print this page

Preliminary Requirements; Setting The Configuration Switches - HP 9000 300 Series Hardware Configuration Manual

Hide thumbs Also See for 9000 300 Series:


Table of Contents
HP 98625B High-Speed HP-IB (IEEE 488) Interface Card
The HP 98625B High-Speed Interface provides a high-speed HP-IB interface
to Command Set 80 (CS/80) disks. It is capable of handling up to four disks
on one interface card. A DMA Controller card is required for the high-speed
HP -IB interface to achieve optimum performance .
. Preliminary Requirements
Find out what your application's accessory high-speed HP-IB interface function
values need to be set to. These functions are:
• Select Code.
• Interrupt level.
• Low/High Speed.
• System Controller.
Your HP 98625B High-Speed HP-IB Interface Card must be set to the values
your application requires.
Operating System Support
Operating/language system support is as follows:
• BASIC: supported on revision 4.0 or later with Series 300 controllers.
• Pascal System: supported on revision 3.1 or later with Series 300 controllers.
• HP- UX Operating System: supported on revision 5.0 or later with Series 300
Setting the Configuration Switches
The high-speed HP-IB interface card may be configured in any number of ways
depending on the requirements of your application. Abbreviated instructions
are provided here; refer to the installation manual that came with the interface
if you need more information.
Refer to Figure 10-5 for switch and jumper positions.
Configuring Popular Accessory Cards


Table of Contents

Related Manuals for HP 9000 300 Series

This manual is also suitable for:


Table of Contents