Download Table of Contents Print this page

Existing Lan Type - HP 9000 300 Series Hardware Configuration Manual

Hide thumbs Also See for 9000 300 Series:


Table of Contents
Each part of this line is explained below.
QUANTUM PD 420S, 1406, 0
Existing LAN Type
Unit 0
Bus address 6 (range
0 -7)
Select Code 14
SCSI interface
Unformatted size in Mbytes
Drive manufacturer
Note the line that reads something like:
HP98643 (LAN) at 21, THIN,
HP98643 (LAN) at 21, AUI,
If, after HP98643 (LAN) at 21" the word:
• THIN appears, ThinLAN is the type and the BNC connector must be used .
• AUI appears, A UI LAN is the type and the D-sub connector must be used.
,Write in the LAN type here:
Refer to chapter n, 'Setting the LAN Type' to learn how change the LAN
configuration jumper.
Your controller's LAN ID is the number at the end of that line. For example:
Your system administrator uses that number for networking configuration.
2·4 Finding Your .Controller's Existing Configuration


Table of Contents

Related Manuals for HP 9000 300 Series

This manual is also suitable for:


Table of Contents