Lift Link Adjustment; Link Yoke Adjustment On Lower Link - Zetor COMPAX CL Series Operator's Manual

CONTROLS, INSTRUMENTS & OPERATIONS

Lift Link Adjustment

Adjust the length of the lift link by turning the adjustment handle. Adjust the length of the lift link as necessary
so that the implement is set in its working position parallel to the ground.
1 - Lift Link
2 - Adjustment Handle
3 - Lower Link

Link Yoke Adjustment on Lower Link

For various applications, the lift height change of the lower links can be adjusted by adjusting the pins in the
holes of the lift links.
1 - Lift Link
Danger: Use the draw bar only for towing and keep the three-point hitch raised when towing
with the draw bar. Incorrect position may cause unbalance, causing the tractor to roll over and result
in machine damage, death or serious injury.
56