Combined Switch; Warning Lights Switch - Zetor PRIMO HT 20 NC Operator's Manual

Combined Switch

1- Turn Signal Light Switch
2- Turn Signal Light (R)
3- Turn Signal Light (L)
4- Light Switch
(1) Light Switch Control
The light switch can be operated when the main switch is in the ''ON' position.
[OFF] - All lights OFF
- Instrument lights, tail lights and low beam lights are ON.
- Instrument lights, tail lights and high beam lights are ON.
Warning: The high beam lights can dazzle the driver in the opposite direction, which can lead
to an unexpected traffic accident.
(2) Turn Signal Light Control
The turn signal lights can be operated when the main switch is in the ''ON' position.
Turning left

Turn the turn signal light switch counterclockwise. Then the left turn signal light and the left turn signal
indicator light on the instrument panel flash.
Turning right

Turn the turn signal light switch clockwise. Then the right turn signal light and the right turn signal
indicator light on the instrument panel flash.
NOTE
This lever does not automatically return to the neutral position. Therefore, it must be returned to the

neutral position after turning.

Warning Lights Switch

1 - Warning Lights Switch
This switch can be used to warn other vehicles in the
event of a tractor breakdown when driving on public roads.
When the switch is pressed, the left and right warning
lights start flashing. Press the switch again to turn off the
lights.
TRACTOR CONTROLS
PRIMOHT20NC_0013
PRIMOHT20NC_0014
41