Main Technical Parameters; Specifications - Zetor COMPAX CL Series Operator's Manual

The specifications on the following pages are for your reference.
Consult your Zetor authorized service center for further information regarding your tractor and implements.
ZETOR TRACTORS a.s. continually improves its policy and reserves the right to change prices or technical
specifications of the machine at any time without prior notice.
Dimensions and weights are approximate and the images do not necessarily show tractors under standard
conditions.
Consult your Zetor authorized service center for accurate information on any particular tractor.

Specifications

MODEL
Engine
Electrical System

MAIN TECHNICAL PARAMETERS

Manufacturer
Model
Type
Nominal power
Number of cylinders
3
Displacement (cm )
Bore and stroke
Rated speed (rpm)
Maximum speed (rpm)
Idle speed (rpm)
Accelerator
Compression ratio
Ignition sequence
Injection Pump
Lubrication type
Cooling System
Refrigerant Volume
Air Filter
Muffler
Fuel
Fuel Tank Capacity
Battery
Starter System
Starter Power
Alternator
Compax CL 25 NC
Yanmar
3TNV76-UD
Water-cooled, four-cycle diesel
18.9 kW (25.3 HP) / 3,000 rpm
3
3
1,116 cm
76 mm x 82 mm (2.99 in. X 3.23 in.)
3,000
3,210 ± 25
1,000 ± 25
Hand + foot
23.5: 1
1-3-2-1
Inline (YanmarML)
Forced closed circuit
Water-cooled, forced circulation
3,6 l (0.95 US gal)
Single Element
Horizontal
Diesel Fuel in EN 590 Standard
22 l (5.8 US gal)
12 V 50 Ah (at 20h)
Starter with preheater
1,2 kW
12 V 40 A
91